Five Steps in a Garage Door Installation

Garage door installation is not as hard as it appears. As long as you follow the instructions by the door manufacturer, it can be done in three hours. Bear in mind that larger doors are harder to install compared to smaller doors.

At first, the many parts and pieces could overwhelm you. There are several parts to consider such as the hinges, rollers, metal track, cables, springs, struts, handles, door panels, bolts, screws and many more. However, most large garage-door manufacturers are now catering to making user-friendly door kits with simple instructions made available. While there are still several parts to be assembled, as long as you read the instructions well and follow them religiously, you will be able to come up with a more professional door installation result.

The items below are simple tips in installing a door for your garage.

1. The first aspect of the job is to remove the existing garage door, if there is one. It is preferable to hire a professional to help you with the task of removing since there is a tendency that you might be injured by the powerful springs of your current garage door.
2. For the garage door to operate smoothly it must be level and the bottoms of the tracks should be parallel and level. It is necessary for the first section of the door to be perfectly level.
3. Make sure you are using only the approved hardware supplies by the manufacturer. Concentrate on the bottom brackets; make sure they are securely fastened on the door. Avoid stripping the bolts by over tightening them.
4. Single-wide garage doors are the easiest to install. Make sure to use the overhead track is securely supported and it should be in perfect alignment. The moment the door starts to go up or the track falls or the door comes out of the track, it can fall. Keep in mind that there are incidents where a garage door fell from the track and hurt people and anything that was under it when it falls.
5. Pay close attention to the instructions on the proper adjustment of the spring. Many springs on doors are adjusted perfectly if the door does not open and close when halfway opened. Make sure to that you are able to lift the door in halfway open position so it will stay there without opening or closing.

Again, you can hire a professional to do the job or help you with the job since most garage doors are heavy, large and sometimes complicated. However, if you are capable of doing it yourself, you will be able to save money and enjoy the achievement and satisfaction of doing the job of installing a garage door yourself.

Never attempt to remove or adjust a garage door with a standard torsion-spring mechanism because these are usually under extreme tension that could make them more dangerous. Instead, it is preferable to call a professional garage door installer to handle the job instead of attempting to do it on your own.

Builders Hardware Supply Discounts, Maximize Your Profits

Property flipping is really nothing more complex than buying something at a discount, putting a markup on it and turning around and selling it. However, purchases from a builders hardware supply store can really eat into your profit margins if you don’t have a reliable source of wholesale building supplies. However, you are in luck: these days, there is no shortage of cut rate builders hardware supply stores online as well as in the brick and mortar world. Discount home remodeling supplies are your key to making real money in the house flipping game.

Getting It Cheap

One of the best ways to get access to discount home building supplies is to become a member of a local or regional builder’s or contractor’s association. Membership in such an organization usually entitles one to purchase wholesale building supplies at prices much lower than are normally available to the general public.

Another way to get discount home improvement supplies and materials is to open an account at a store such as Home Depot or Lowes. Since these chains sell in volume, they can afford to extend special discounts to contractors – and usually do when professionals in the construction trades open a credit account with them.

Discount Contractor Supplies You’ll Need

The advantage to belonging to a contractor’s association or opening a charge account at a major builders’ hardware supply retailer (or both) is of course buying power; again, this goes back to volume, meaning often steep discounts on necessary materials such as:

• lumber
• drywall
• adhesives
• concrete
• pipe
• more…

If you were not able to purchases discount home building supplies at lower prices this way, you would probably wind up spending all your profits on a house flip in fixing the place up.

Another Source of Discount Contractor Supplies

One growing trend in discount home improvement supplies is recycled materials. These are essentially salvage operations that gather materials from demolition sites and resell them. While not new, these materials are usually quite usable (they include doors, lighting fixtures, plumbing fixtures and more) and the price is very competitive with new wholesale building supplies. In addition, it’s a “green” thing to do, since these materials would otherwise wind up in a landfill.